{"id":1455,"date":"2026-11-19T14:20:13","date_gmt":"2026-11-19T06:20:13","guid":{"rendered":"https:\/\/www.ypmfg.com\/2026\/11\/19\/cnc-routing-vs-milling-quick-guide\/"},"modified":"2026-11-19T14:20:13","modified_gmt":"2026-11-19T06:20:13","slug":"cnc-routing-vs-milling-quick-guide","status":"publish","type":"post","link":"https:\/\/www.ypmfg.com\/fr\/2026\/11\/19\/cnc-routing-vs-milling-quick-guide\/","title":{"rendered":"CNC Routing vs Milling: Quick Guide"},"content":{"rendered":"<div style=\"margin: 0 auto;padding: 20px;font-family: -apple-system, BlinkMacSystemFont, &#039;Segoe UI&#039;, Roboto, &#039;Helvetica Neue&#039;, Arial, sans-serif\">\n<blockquote style=\"margin: 1.6em 0;padding: 1.2em 1.5em;background: linear-gradient(90deg, #faf2f4 0%, #fff 100%);border-left: 4px solid #d05570;color: #444444;font-style: italic;border-radius: 0 8px 8px 0\">\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">CNC routing cuts sheets and panels with large, rigid tools in a single vacuum-table setup. CNC milling uses small, high-RPM tooling for tighter <strong style=\"font-weight: 600;color: #b32050\">Tol\u00e9rance d'usinage CNC<\/strong> on solid blocks. For panel work under 60 mm, routing wins on cost. For sub-0.5 mm features, milling is the only path.<\/p>\n<\/blockquote>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">Most buyers hit this fork when a drawing calls for thin walls, deep pockets, or multi-face registration. Picking the wrong machine surfaces at inspection: rework, rejected lots, or a schedule slip that cascades into assembly. YPMFG engineers map every feature to a machine before a quote ships, so a process mismatch does not cost you a batch.<\/p>\n<h2 style=\"font-size: 20px;font-weight: 600;margin: 1.4em 0 0.5em;color: #b32050;line-height: 1.4\">Key Takeaways<\/h2>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">\n<ul style=\"margin: 1.2em 0;padding-left: 1.8em;line-height: 1.9;list-style-type: disc\">\n<li style=\"margin: 0.5em 0;color: #222222\"><strong style=\"font-weight: 600;color: #b32050\">Vitesse de broche<\/strong>: Routing spindles top out near 24,000 RPM; milling spindles exceed 30,000 RPM. That gap sets the floor on minimum feature width.<\/li>\n<li style=\"margin: 0.5em 0;color: #222222\"><strong style=\"font-weight: 600;color: #b32050\">\u00c9paisseur du mat\u00e9riau<\/strong>: Routers clear panels to 100 mm in one pass. Mills stay efficient below 50 mm, where tool overhang and chatter risk drop.<\/li>\n<li style=\"margin: 0.5em 0;color: #222222\"><strong style=\"font-weight: 600;color: #b32050\"><a href=\"\/fr\/2026\/11\/18\/stop-machining-dimensional-variation\/\" title=\"Tol\u00e9rance\" target=\"_blank\">Tol\u00e9rance<\/a> band<\/strong>: Milling holds <strong style=\"font-weight: 600;color: #b32050\">ISO 2768-m<\/strong> or tighter on critical faces. Routing typically lands at 2768-c for general geometry.<\/li>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\"><\/ul>\n<\/p>\n<h2 style=\"font-size: 20px;font-weight: 600;margin: 1.4em 0 0.5em;color: #b32050;line-height: 1.4\">Head-to-Head: Routing vs Milling at a Glance<\/h2>\n<table style=\"width: 100%;border-collapse: collapse;margin: 1.6em 0;border-radius: 10px 10px 0 0;overflow: hidden\">\n<thead>\n<tr>\n<th style=\"background: #9e1840;color: #fff;padding: 14px 16px;text-align: left;font-weight: 600;border: 1px solid #e0e0e0\">Dimension<\/th>\n<th style=\"background: #9e1840;color: #fff;padding: 14px 16px;text-align: left;font-weight: 600;border: 1px solid #e0e0e0\">Fraisage CNC<\/th>\n<th style=\"background: #9e1840;color: #fff;padding: 14px 16px;text-align: left;font-weight: 600;border: 1px solid #e0e0e0\">Fraisage CNC<\/th>\n<th style=\"background: #9e1840;color: #fff;padding: 14px 16px;text-align: left;font-weight: 600;border: 1px solid #e0e0e0\">Decision Threshold<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"padding: 12px 16px;color: #222222;border: 1px solid #e0e0e0\">Typical stock<\/td>\n<td style=\"padding: 12px 16px;color: #222222;border: 1px solid #e0e0e0\">3-100 mm sheet, panel, profile<\/td>\n<td style=\"padding: 12px 16px;color: #222222;border: 1px solid #e0e0e0\">5-50 mm bar, plate, block<\/td>\n<td style=\"padding: 12px 16px;color: #222222;border: 1px solid #e0e0e0\">Above 60 mm: route<\/td>\n<\/tr>\n<tr>\n<td style=\"padding: 12px 16px;color: #222222;border: 1px solid #e0e0e0\">Minimum feature width<\/td>\n<td style=\"padding: 12px 16px;color: #222222;border: 1px solid #e0e0e0\">~0.8 mm with 0.5 mm end mill<\/td>\n<td style=\"padding: 12px 16px;color: #222222;border: 1px solid #e0e0e0\">Below 0.3 mm with micro tooling<\/td>\n<td style=\"padding: 12px 16px;color: #222222;border: 1px solid #e0e0e0\">Under 0.5 mm: mill<\/td>\n<\/tr>\n<tr>\n<td style=\"padding: 12px 16px;color: #222222;border: 1px solid #e0e0e0\">Positional tolerance<\/td>\n<td style=\"padding: 12px 16px;color: #222222;border: 1px solid #e0e0e0\">ISO 2768-c typical<\/td>\n<td style=\"padding: 12px 16px;color: #222222;border: 1px solid #e0e0e0\">ISO 2768-m or tighter<\/td>\n<td style=\"padding: 12px 16px;color: #222222;border: 1px solid #e0e0e0\">Tighter than 0.1 mm: mill<\/td>\n<\/tr>\n<tr>\n<td style=\"padding: 12px 16px;color: #222222;border: 1px solid #e0e0e0\">Fixturing<\/td>\n<td style=\"padding: 12px 16px;color: #222222;border: 1px solid #e0e0e0\">Vacuum table, no clamps<\/td>\n<td style=\"padding: 12px 16px;color: #222222;border: 1px solid #e0e0e0\">Soft jaws or modular fixture<\/td>\n<td style=\"padding: 12px 16px;color: #222222;border: 1px solid #e0e0e0\">Batch over 200 pcs: route<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">If the part is a flat panel under 60 mm with no sub-0.5 mm features, routing saves fixture time and tool cost. Everything else points toward a <strong style=\"font-weight: 600;color: #b32050\">5 axis CNC<\/strong> milling cell.<\/p>\n<h2 style=\"font-size: 20px;font-weight: 600;margin: 1.4em 0 0.5em;color: #b32050;line-height: 1.4\">What Physically Separates a Router From a Mill?<\/h2>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\"><img decoding=\"async\" src=\"https:\/\/www.ypmfg.com\/wp-content\/themes\/mb\/images_nengli\/cnc-turning-flanges-connectors-optimized.jpg\" alt=\"cnc routing vs cnc milling_facemilling_cnc routing vs cnc milling\" style=\"width: 100%;max-width: 960px;height: auto;display: block;margin: 1.8em auto;border-radius: 0px\"><\/p>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">The core gap is tool diameter and frame rigidity. A router accepts 10-25 mm end mills and plunges the bit into the workpiece. A mill runs 0.2-10 mm tools at higher RPM, relying on horizontal engagement to suppress chatter.<\/p>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">Two hard limits follow. A router cannot hold a 0.5 mm tool in a 40 mm pocket without deflection. A mill cannot rough out 80 mm of <strong style=\"font-weight: 600;color: #b32050\">6061<\/strong> aluminum in a reasonable cycle because spindle torque drops as tool radius grows.<\/p>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">Before specifying either machine, confirm your drawing&#8217;s minimum wall thickness and maximum pocket depth. If the wall is under 1 mm or the pocket exceeds 50 mm, the choice is not open. No feed-rate adjustment closes that gap on the wrong machine.<\/p>\n<h2 style=\"font-size: 20px;font-weight: 600;margin: 1.4em 0 0.5em;color: #b32050;line-height: 1.4\">How Do Material Choices Narrow Your Options?<\/h2>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">Not every stock form suits both machines. Routing favors dimensional-stable sheet: <strong style=\"font-weight: 600;color: #b32050\">304<\/strong> stainless, <strong style=\"font-weight: 600;color: #b32050\">ABS<\/strong>,<strong style=\"font-weight: 600;color: #b32050\">PC<\/strong>, and plywood. Milling favors machinable bar: <strong style=\"font-weight: 600;color: #b32050\">H13<\/strong> tool steel, <strong style=\"font-weight: 600;color: #b32050\">316L<\/strong>, et <strong style=\"font-weight: 600;color: #b32050\">5052<\/strong> aluminum.<\/p>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">Soft stocks like <strong style=\"font-weight: 600;color: #b32050\">Nylon<\/strong> ou <strong style=\"font-weight: 600;color: #b32050\">Laiton<\/strong> chip on either machine, but evacuation differs. A router&#8217;s open table lets chips fall away. A mill must use air blast or flood coolant to clear the pocket, or the tool burns on recut material.<\/p>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">\n<ul style=\"margin: 1.2em 0;padding-left: 1.8em;line-height: 1.9;list-style-type: disc\">\n<li style=\"margin: 0.5em 0;color: #222222\">Sheet plus 2.5-D profile: route it.<\/li>\n<li style=\"margin: 0.5em 0;color: #222222\">Bar or plate with through-machining on multiple faces: mill it.<\/li>\n<li style=\"margin: 0.5em 0;color: #222222\">Material ships as a 12 mm plate but needs 4-sided finish: mill, because no router table registers four faces.<\/li>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\"><\/ul>\n<\/p>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">Send your material spec to YPMFG and an engineer will confirm tooling availability and chip strategy before the quote is cut.<\/p>\n<h2 style=\"font-size: 20px;font-weight: 600;margin: 1.4em 0 0.5em;color: #b32050;line-height: 1.4\">Where Does Tolerance Actually Diverge?<\/h2>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\"><img decoding=\"async\" src=\"https:\/\/www.ypmfg.com\/wp-content\/themes\/mb\/images_nengli\/automotive-brackets-optimized.png\" alt=\"cnc routing vs cnc milling_facemilling_cnc routing vs cnc milling\" style=\"width: 100%;max-width: 960px;height: auto;display: block;margin: 1.8em auto;border-radius: 0px\"><\/p>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">Routing holds <strong style=\"font-weight: 600;color: #b32050\">Tol\u00e9rance d'usinage CNC<\/strong> in the ISO 2768-c band. Milling, with rigid tooling and short overhang, reaches 2768-m and, on dedicated <strong style=\"font-weight: 600;color: #b32050\">5 axis CNC<\/strong> cells, tighter still.<\/p>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">The number that matters most is flatness. A 500 mm routed panel can drift by several tenths across its span because the vacuum table flexes under cutting force. A milled block on a cast-iron table stays within a fraction of a millimeter over the same distance.<\/p>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">If your assembly mates on two or more faces and the drawing calls for <strong style=\"font-weight: 600;color: #b32050\">ASME Y14.5<\/strong> positional datums, milling is the only reliable path. For structural panels where \u00b10.15 mm suffices, routing keeps unit cost down. The physical limit: no router table guarantees sub-0.05 mm flatness on a one-meter panel.<\/p>\n<h2 style=\"font-size: 20px;font-weight: 600;margin: 1.4em 0 0.5em;color: #b32050;line-height: 1.4\">What Actually Drives Unit Cost and Lead Time?<\/h2>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">Three cost drivers dominate: tooling variety, fixture time, and material removal rate. A panel with 40 through-holes routes in one pass with a single 6 mm bit. The same panel milled needs 40 plunge-and-peck cycles with tool changes, multiplying setup.<\/p>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">Conversely, a 3-D bracket with draft angles and internal ribs cannot be routed at all. It needs a 3- or 5-axis mill with tool-change automation. Lead time follows the same split: routing batches run back-to-back; milling batches require re-clamping and tool-path re-verification per setup.<\/p>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">In steady production, a <strong style=\"font-weight: 600;color: #b32050\">Revue DFM<\/strong> maps each feature to the fastest process before you commit to volume. That one step catches the fixture risk that quietly adds two days to every batch.<\/p>\n<h2 style=\"font-size: 20px;font-weight: 600;margin: 1.4em 0 0.5em;color: #b32050;line-height: 1.4\">How a Routing-Plus-Milling Hybrid Handles a Mixed-Geometry Bracket<\/h2>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">Take a 12 mm <strong style=\"font-weight: 600;color: #b32050\">316<\/strong> stainless plate. The flat base carries 60 through-holes and two chamfered edges. A 25 mm raised lip holds two tapped holes and a 3 mm radius fillet on its inner face.<\/p>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">\n<ol style=\"margin: 1.2em 0;padding-left: 1.8em;line-height: 1.9;list-style-type: decimal\">\n<li style=\"margin: 0.5em 0;color: #222222\">Route the 60 holes and chamfer the outer edges on a vacuum-table router. One setup, no clamps.<\/li>\n<li style=\"margin: 0.5em 0;color: #222222\">Flip the blank, clamp in soft jaws on a 3-axis mill. Drill and tap the two holes at 12,000 RPM.<\/li>\n<li style=\"margin: 0.5em 0;color: #222222\">Finish the fillet with a 4 mm ball end mill. Verify lip-to-base squareness on a CMM.<\/li>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\"><\/ol>\n<\/p>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">Two failure modes to watch: chatter on the 25 mm lip when tool overhang exceeds three times its diameter (fix: stiffer support, not slower feed), and work hardening on the 316 at the tap step (fix: sharp helix angle and cutting fluid).<\/p>\n<blockquote style=\"margin: 1.6em 0;padding: 1.2em 1.5em;background: linear-gradient(90deg, #faf2f4 0%, #fff 100%);border-left: 4px solid #d05570;color: #444444;font-style: italic;border-radius: 0 8px 8px 0\">\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">Process Route Reference: YPMFG process library, reviewed against published tooling data. Client-specific data withheld per NDA.<\/p>\n<\/blockquote>\n<h2 style=\"font-size: 20px;font-weight: 600;margin: 1.4em 0 0.5em;color: #b32050;line-height: 1.4\">Practical Questions Before You Specify the Machine<\/h2>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\"><strong style=\"font-weight: 600;color: #b32050\">Can a router hold the same tolerance as a mill?<\/strong> No. Vacuum-table rigidity and larger tool deflection cap routing at ISO 2768-c. Anything tighter requires a mill.<\/p>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\"><strong style=\"font-weight: 600;color: #b32050\">What is the largest panel a router accepts?<\/strong> Common industrial tables run to 3 m \u00d7 4 m. Beyond that you split and weld, adding a separate tolerance stack that a single-mill setup avoids.<\/p>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\"><strong style=\"font-weight: 600;color: #b32050\">Is five-axis routing a real category?<\/strong> It cannot be called routing in the traditional sense. Five-axis simultaneous contouring with a small ball-end mill is milling. The label in a brochure does not change the physics.<\/p>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\"><strong style=\"font-weight: 600;color: #b32050\">How do I quickly tell which machine my drawing needs?<\/strong> Check two numbers: minimum feature size and maximum wall thickness. Under 0.5 mm or above 60 mm, the answer is mill. Between those bounds, either works and unit cost decides.<\/p>\n<h2 style=\"font-size: 20px;font-weight: 600;margin: 1.4em 0 0.5em;color: #b32050;line-height: 1.4\">Choosing the Right Machine for Your Next Batch<\/h2>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">The routing-versus-milling call rests on three facts on your drawing: minimum feature, maximum thickness, and tolerance band. Get those three right and the process choice is mechanical. Get them wrong and you pay in scrap, rework, and schedule pressure no machine upgrade undoes.<\/p>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">YPMFG reviews incoming drawings against machine capability, tooling libraries, and material behavior before any quote ships. You receive a process recommendation, a DFM note on each critical feature, and a realistic lead-time range tied to the specific machine and tool set. Send your specifications or a PDF drawing to the YPMFG engineering team and request an assessment. The review flags every feature that forces a mill, every open area a router clears faster, and the fixture strategy that keeps setup under control for your batch size.<\/p>\n<\/div>","protected":false},"excerpt":{"rendered":"<p>CNC routing cuts sheets and panels with large, rigid tools in a single vacuum-table setup<\/p>","protected":false},"author":1,"featured_media":1456,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[44],"tags":[381,463,532,537,768],"class_list":["post-1455","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog","tag-cnc-milling","tag-tolerance","tag-5-axis-cnc","tag-material-thickness","tag-cnc-routing"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.3 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>CNC Routing vs Milling: Quick Guide<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.ypmfg.com\/fr\/2026\/11\/19\/cnc-routing-vs-milling-quick-guide\/\" \/>\n<meta property=\"og:locale\" content=\"fr_FR\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"CNC Routing vs Milling: Quick Guide\" \/>\n<meta property=\"og:description\" content=\"CNC routing cuts sheets and panels with large, rigid tools in a single vacuum-table setup\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.ypmfg.com\/fr\/2026\/11\/19\/cnc-routing-vs-milling-quick-guide\/\" \/>\n<meta property=\"og:site_name\" content=\"YP-MFG| Custom CNC Parts Made Exactly to Spec\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-19T06:20:13+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.ypmfg.com\/wp-content\/themes\/mb\/images_nengli\/cnc-turning-flanges-connectors-optimized.jpg\" \/>\n<meta name=\"author\" content=\"admin\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"\u00c9crit par\" \/>\n\t<meta name=\"twitter:data1\" content=\"admin\" \/>\n\t<meta name=\"twitter:label2\" content=\"Dur\u00e9e de lecture estim\u00e9e\" \/>\n\t<meta name=\"twitter:data2\" content=\"6 minutes\" \/>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"CNC Routing vs Milling: Quick Guide","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.ypmfg.com\/fr\/2026\/11\/19\/cnc-routing-vs-milling-quick-guide\/","og_locale":"fr_FR","og_type":"article","og_title":"CNC Routing vs Milling: Quick Guide","og_description":"CNC routing cuts sheets and panels with large, rigid tools in a single vacuum-table setup","og_url":"https:\/\/www.ypmfg.com\/fr\/2026\/11\/19\/cnc-routing-vs-milling-quick-guide\/","og_site_name":"YP-MFG| Custom CNC Parts Made Exactly to Spec","article_published_time":"2026-11-19T06:20:13+00:00","og_image":[{"url":"https:\/\/www.ypmfg.com\/wp-content\/themes\/mb\/images_nengli\/cnc-turning-flanges-connectors-optimized.jpg","type":"","width":"","height":""}],"author":"admin","twitter_card":"summary_large_image","twitter_misc":{"\u00c9crit par":"admin","Dur\u00e9e de lecture estim\u00e9e":"6 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.ypmfg.com\/fr\/2026\/11\/19\/cnc-routing-vs-milling-quick-guide\/#article","isPartOf":{"@id":"https:\/\/www.ypmfg.com\/fr\/2026\/11\/19\/cnc-routing-vs-milling-quick-guide\/"},"author":{"name":"admin","@id":"https:\/\/www.ypmfg.com\/fr\/#\/schema\/person\/1ad07d09a6f18573f3b764ab0b4a8484"},"headline":"CNC Routing vs Milling: Quick Guide","datePublished":"2026-11-19T06:20:13+00:00","mainEntityOfPage":{"@id":"https:\/\/www.ypmfg.com\/fr\/2026\/11\/19\/cnc-routing-vs-milling-quick-guide\/"},"wordCount":1199,"commentCount":0,"image":{"@id":"https:\/\/www.ypmfg.com\/fr\/2026\/11\/19\/cnc-routing-vs-milling-quick-guide\/#primaryimage"},"thumbnailUrl":"https:\/\/www.ypmfg.com\/wp-content\/themes\/mb\/images_nengli\/cnc-turning-flanges-connectors-optimized.jpg","keywords":["CNC Milling","Tolerance","5-Axis CNC","Material Thickness","CNC Routing"],"articleSection":["Blog"],"inLanguage":"fr-FR","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.ypmfg.com\/fr\/2026\/11\/19\/cnc-routing-vs-milling-quick-guide\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.ypmfg.com\/fr\/2026\/11\/19\/cnc-routing-vs-milling-quick-guide\/","url":"https:\/\/www.ypmfg.com\/fr\/2026\/11\/19\/cnc-routing-vs-milling-quick-guide\/","name":"CNC Routing vs Milling: Quick Guide","isPartOf":{"@id":"https:\/\/www.ypmfg.com\/fr\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.ypmfg.com\/fr\/2026\/11\/19\/cnc-routing-vs-milling-quick-guide\/#primaryimage"},"image":{"@id":"https:\/\/www.ypmfg.com\/fr\/2026\/11\/19\/cnc-routing-vs-milling-quick-guide\/#primaryimage"},"thumbnailUrl":"https:\/\/www.ypmfg.com\/wp-content\/themes\/mb\/images_nengli\/cnc-turning-flanges-connectors-optimized.jpg","datePublished":"2026-11-19T06:20:13+00:00","author":{"@id":"https:\/\/www.ypmfg.com\/fr\/#\/schema\/person\/1ad07d09a6f18573f3b764ab0b4a8484"},"breadcrumb":{"@id":"https:\/\/www.ypmfg.com\/fr\/2026\/11\/19\/cnc-routing-vs-milling-quick-guide\/#breadcrumb"},"inLanguage":"fr-FR","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.ypmfg.com\/fr\/2026\/11\/19\/cnc-routing-vs-milling-quick-guide\/"]}]},{"@type":"ImageObject","inLanguage":"fr-FR","@id":"https:\/\/www.ypmfg.com\/fr\/2026\/11\/19\/cnc-routing-vs-milling-quick-guide\/#primaryimage","url":"https:\/\/www.ypmfg.com\/wp-content\/themes\/mb\/images_nengli\/cnc-turning-flanges-connectors-optimized.jpg","contentUrl":"https:\/\/www.ypmfg.com\/wp-content\/themes\/mb\/images_nengli\/cnc-turning-flanges-connectors-optimized.jpg","width":1600,"height":1200},{"@type":"BreadcrumbList","@id":"https:\/\/www.ypmfg.com\/fr\/2026\/11\/19\/cnc-routing-vs-milling-quick-guide\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.ypmfg.com\/"},{"@type":"ListItem","position":2,"name":"CNC Routing vs Milling: Quick Guide"}]},{"@type":"WebSite","@id":"https:\/\/www.ypmfg.com\/fr\/#website","url":"https:\/\/www.ypmfg.com\/fr\/","name":"YP-MFG | Pi\u00e8ces sur mesure usin\u00e9es par CNC, fabriqu\u00e9es exactement selon les sp\u00e9cifications","description":"","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.ypmfg.com\/fr\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"fr-FR"},{"@type":"Person","@id":"https:\/\/www.ypmfg.com\/fr\/#\/schema\/person\/1ad07d09a6f18573f3b764ab0b4a8484","name":"admin","image":{"@type":"ImageObject","inLanguage":"fr-FR","@id":"https:\/\/secure.gravatar.com\/avatar\/5edfa2692bdacc5e6ee805c626c50cb44cebb065f092d9a1067d89f74dacd326?s=96&d=mm&r=x","url":"https:\/\/secure.gravatar.com\/avatar\/5edfa2692bdacc5e6ee805c626c50cb44cebb065f092d9a1067d89f74dacd326?s=96&d=mm&r=x","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/5edfa2692bdacc5e6ee805c626c50cb44cebb065f092d9a1067d89f74dacd326?s=96&d=mm&r=x","caption":"admin"},"sameAs":["http:\/\/127.0.0.57"],"url":"https:\/\/www.ypmfg.com\/fr\/author\/admin\/"}]}},"permalink_manager":null,"_links":{"self":[{"href":"https:\/\/www.ypmfg.com\/fr\/wp-json\/wp\/v2\/posts\/1455","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.ypmfg.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.ypmfg.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.ypmfg.com\/fr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.ypmfg.com\/fr\/wp-json\/wp\/v2\/comments?post=1455"}],"version-history":[{"count":0,"href":"https:\/\/www.ypmfg.com\/fr\/wp-json\/wp\/v2\/posts\/1455\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.ypmfg.com\/fr\/wp-json\/wp\/v2\/media\/1456"}],"wp:attachment":[{"href":"https:\/\/www.ypmfg.com\/fr\/wp-json\/wp\/v2\/media?parent=1455"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.ypmfg.com\/fr\/wp-json\/wp\/v2\/categories?post=1455"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.ypmfg.com\/fr\/wp-json\/wp\/v2\/tags?post=1455"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}