{"id":736,"date":"2026-10-08T16:08:16","date_gmt":"2026-10-08T08:08:16","guid":{"rendered":"https:\/\/www.ypmfg.com\/2026\/10\/08\/m03-code-in-cnc-meaning-use-errors\/"},"modified":"2026-10-08T16:08:16","modified_gmt":"2026-10-08T08:08:16","slug":"m03-code-in-cnc-meaning-use-errors","status":"publish","type":"post","link":"https:\/\/www.ypmfg.com\/ja\/2026\/10\/08\/m03-code-in-cnc-meaning-use-errors\/","title":{"rendered":"M03 Code in CNC: Meaning, Use & Errors"},"content":{"rendered":"
\n

\u7c21\u5358\u306a\u7b54\u3048\uff1a<\/strong><\/p>\n

M03<\/a> in a CNC G-code program<\/strong> tells the control to start the spindle clockwise at the programmed S-code speed. Written as T03 M03, the machine changes to tool 3 first, then spins it forward. This is one of the most common spindle commands in Fanuc<\/strong>-based controls and many other platforms. Using M03 without a matching S value, or in the wrong sequence relative to M06<\/strong>, can trigger alarms, poor cuts, or tool damage.<\/p>\n

If you are reading a part program, troubleshooting a spindle alarm, or writing code for a CNC\u30de\u30b7\u30cb\u30f3\u30b0\u30bb\u30f3\u30bf\u30fc<\/strong>, M03 appears on nearly every cutting operation. Knowing exactly what it triggers\u2014and what it does not\u2014helps you write safer programs and avoid costly downtime.<\/p>\n

What M03 Actually Does<\/h2>\n

M03 is a spindle-direction code, not a tool-change code. It commands the spindle motor to rotate clockwise as viewed from the machine front. The actual RPM comes from a separate S value on the same block or a preceding line.<\/p>\n

Without a matching S value, most controls either run at a parameter-defined default or raise an alarm. M03 does not select a tool; the T address handles that. Physical tool exchange on automatic changers is governed by M06<\/strong>, which is a separate function entirely.<\/p>\n

M03 vs. Neighbouring Spindle Codes<\/h2>\n\n\n\n\n\n\n
Code<\/th>\nAction<\/th>\n\u4ee3\u8868\u7684\u306a\u7528\u9014<\/th>\n<\/tr>\n
M03<\/td>\nSpindle forward (clockwise)<\/td>\nDrilling, end-milling, turning<\/td>\n<\/tr>\n
M04<\/td>\nSpindle reverse (counter-clockwise)<\/td>\nLeft-hand taps, helical interpolation<\/td>\n<\/tr>\n
M05<\/td>\n\u30b9\u30d4\u30f3\u30c9\u30eb\u505c\u6b62<\/td>\nBetween operations, before tool change<\/td>\n<\/tr>\n
M06<\/td>\nAutomatic tool change<\/td>\nMulti-tool machining-center programs<\/td>\n<\/tr>\n<\/table>\n

The M03-versus-M04 distinction matters when you program a left-hand tap<\/strong> or a helical milling path. Using the wrong direction will walk the tool or strip the thread before the part is finished.<\/p>\n

\"m03<\/p>\n

M03 in a Typical Tool-Change Sequence<\/h2>\n

A standard drilling block often reads:<\/p>\n

T04 M06\nS1200 M03\nG00 X10.0 Y5.0\nG01 Z-15.0 F200\n<\/code><\/pre>\n
The T address selects the tool in the magazine. M06 executes the physical swap. M03 then brings the newly seated tool up to speed before the rapid traverse.<\/p>\n
The order is critical. If M03 appears before the tool is physically in the spindle, the control may alarm or spin an empty holder, risking a crash into the workpiece or the fixture.<\/strong><\/p>\n
Common Mistakes & Fixes<\/h2>\n
Missing S code.<\/strong> M03 written with no speed reference. Add an S value on the same or the preceding line.<\/p>\n
M03 on the same block as M06.<\/strong> Some controls accept it, but many require two separate lines. Keep them apart for reliability.<\/p>\n
Wrong direction for the tool.<\/strong> A left-hand tap needs M04<\/strong>,not M03. Check the tool’s handedness before programming.<\/p>\n
\"m03<\/p>\n
Forgetting M05 between operations.<\/strong> If the spindle is still spinning when the next M06 fires, several controls will alarm because they require a stationary spindle for a safe change.<\/p>\n
Hard-coded speed for every M03.<\/strong> A fixed S value on each line makes later adjustments tedious. Use a macro or a single referenced S variable where your control supports it.<\/p>\n
YPMFG’s engineering team routinely reviews part programs for exactly these sequencing issues before releasing them to the shop floor, catching problems that would otherwise surface as mid-run alarms.<\/p>\n
Questions Programmers & Buyers Often Ask About M03<\/h2>\n
Does M03 behave the same on every control?<\/strong><\/p>\n
The forward-direction concept is universal, but the response to a missing S value is not. Fanuc uses a parameter-defined default speed; Haas and Mazatrol may alarm immediately. Always verify the behavior in your specific machine’s programming manual.<\/p>\n
Can I use M03 on a CNC lathe?<\/strong><\/p>\n
Yes. On a CNC\u65cb\u76e4<\/strong>, M03 still means spindle start forward. The T code selects a turret position rather than a magazine slot, so the tool-change sequence differs slightly from a machining center.<\/p>\n
What if I write M03 with S0?<\/strong><\/p>\n
Most controls treat S0 combined with M03 as a spindle stop, effectively the same as M05. A few will raise an alarm instead. Check your machine’s parameter settings before relying on this behavior.<\/p>\n
Do I need M03 after every tool change?<\/strong><\/p>\n
If the next line is a cutting move (G01, G02, G03), yes. After M06 seats the tool, the spindle is stationary. You must re-issue M03 or M04 with the correct S value before any feed-rate move.<\/strong><\/p>\n
How does M03 affect cycle time?<\/strong><\/p>\n
Spin-up from zero to target RPM adds a few seconds per operation. On high-speed spindles reaching 12,000 RPM, that acceleration window is noticeable in batch production. Place M03 as close as the sequence allows to the first cutting line to minimise idle spin.<\/p>\n
Choosing the Right Spindle Code for Your Program<\/h2>\n
Getting M03, M04, and M05 into the correct order with matching S values is the foundation of a safe, repeatable part program. When you are outsourcing CNC-machined components<\/strong> and reviewing a supplier’s program, confirm that every M03 carries a realistic S value for the tool material and the \u5207\u524a\u901f\u5ea6<\/strong> the operation demands.<\/p>\n
If you would like a second set of eyes on your G-code, need a custom tool-change sequence matched to your part geometry, or want \u30a8\u30f3\u30b8\u30cb\u30a2\u30ea\u30f3\u30b0\u30b5\u30dd\u30fc\u30c8<\/strong> on spindle parameters, you can send your drawings and specifications to YPMFG for a technical review. Their team can flag missing codes, suggest safer operation sequences, and help you avoid the kind of tool crash that costs hours of machine time.<\/p>\n<\/div>","protected":false},"excerpt":{"rendered":"
Quick answer:M03 in a CNC G-<\/p>","protected":false},"author":1,"featured_media":737,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[44],"tags":[615,406,617,91,616],"class_list":["post-736","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog","tag-cnc-g-code","tag-cnc-machining","tag-fanuc-controls","tag-m03","tag-spindle-commands"],"yoast_head":"\nM03 Code in CNC: Meaning, Use & Errors<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.ypmfg.com\/ja\/2026\/10\/08\/m03-code-in-cnc-meaning-use-errors\/\" \/>\n<meta property=\"og:locale\" content=\"ja_JP\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"M03 Code in CNC: Meaning, Use & Errors\" \/>\n<meta property=\"og:description\" content=\"Quick answer:M03 in a CNC G-\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.ypmfg.com\/ja\/2026\/10\/08\/m03-code-in-cnc-meaning-use-errors\/\" \/>\n<meta property=\"og:site_name\" content=\"YP-MFG| Custom CNC Parts Made Exactly to Spec\" \/>\n<meta property=\"article:published_time\" content=\"2026-10-08T08:08:16+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.ypmfg.com\/wp-content\/themes\/mb\/images_nengli\/cnc-route1-optimized.jpg\" \/>\n<meta name=\"author\" content=\"admin\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"\u57f7\u7b46\u8005\" \/>\n\t<meta name=\"twitter:data1\" content=\"admin\" \/>\n\t<meta name=\"twitter:label2\" content=\"\u63a8\u5b9a\u8aad\u307f\u53d6\u308a\u6642\u9593\" \/>\n\t<meta name=\"twitter:data2\" content=\"4\u5206\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.ypmfg.com\\\/ja\\\/2026\\\/10\\\/08\\\/m03-code-in-cnc-meaning-use-errors\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.ypmfg.com\\\/ja\\\/2026\\\/10\\\/08\\\/m03-code-in-cnc-meaning-use-errors\\\/\"},\"author\":{\"name\":\"admin\",\"@id\":\"https:\\\/\\\/www.ypmfg.com\\\/ja\\\/#\\\/schema\\\/person\\\/1ad07d09a6f18573f3b764ab0b4a8484\"},\"headline\":\"M03 Code in CNC: Meaning, Use & Errors\",\"datePublished\":\"2026-10-08T08:08:16+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.ypmfg.com\\\/ja\\\/2026\\\/10\\\/08\\\/m03-code-in-cnc-meaning-use-errors\\\/\"},\"wordCount\":870,\"commentCount\":0,\"image\":{\"@id\":\"https:\\\/\\\/www.ypmfg.com\\\/ja\\\/2026\\\/10\\\/08\\\/m03-code-in-cnc-meaning-use-errors\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.ypmfg.com\\\/wp-content\\\/themes\\\/mb\\\/images_nengli\\\/cnc-route1-optimized.jpg\",\"keywords\":[\"CNC G-code\",\"CNC Machining\",\"Fanuc Controls\",\"M03\",\"Spindle Commands\"],\"articleSection\":[\"Blog\"],\"inLanguage\":\"ja\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/www.ypmfg.com\\\/ja\\\/2026\\\/10\\\/08\\\/m03-code-in-cnc-meaning-use-errors\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.ypmfg.com\\\/ja\\\/2026\\\/10\\\/08\\\/m03-code-in-cnc-meaning-use-errors\\\/\",\"url\":\"https:\\\/\\\/www.ypmfg.com\\\/ja\\\/2026\\\/10\\\/08\\\/m03-code-in-cnc-meaning-use-errors\\\/\",\"name\":\"M03 Code in CNC: Meaning, Use & Errors\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.ypmfg.com\\\/ja\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.ypmfg.com\\\/ja\\\/2026\\\/10\\\/08\\\/m03-code-in-cnc-meaning-use-errors\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.ypmfg.com\\\/ja\\\/2026\\\/10\\\/08\\\/m03-code-in-cnc-meaning-use-errors\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.ypmfg.com\\\/wp-content\\\/themes\\\/mb\\\/images_nengli\\\/cnc-route1-optimized.jpg\",\"datePublished\":\"2026-10-08T08:08:16+00:00\",\"author\":{\"@id\":\"https:\\\/\\\/www.ypmfg.com\\\/ja\\\/#\\\/schema\\\/person\\\/1ad07d09a6f18573f3b764ab0b4a8484\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.ypmfg.com\\\/ja\\\/2026\\\/10\\\/08\\\/m03-code-in-cnc-meaning-use-errors\\\/#breadcrumb\"},\"inLanguage\":\"ja\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.ypmfg.com\\\/ja\\\/2026\\\/10\\\/08\\\/m03-code-in-cnc-meaning-use-errors\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"ja\",\"@id\":\"https:\\\/\\\/www.ypmfg.com\\\/ja\\\/2026\\\/10\\\/08\\\/m03-code-in-cnc-meaning-use-errors\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.ypmfg.com\\\/wp-content\\\/themes\\\/mb\\\/images_nengli\\\/cnc-route1-optimized.jpg\",\"contentUrl\":\"https:\\\/\\\/www.ypmfg.com\\\/wp-content\\\/themes\\\/mb\\\/images_nengli\\\/cnc-route1-optimized.jpg\",\"width\":1189,\"height\":891},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.ypmfg.com\\\/ja\\\/2026\\\/10\\\/08\\\/m03-code-in-cnc-meaning-use-errors\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.ypmfg.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"M03 Code in CNC: Meaning, Use & Errors\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.ypmfg.com\\\/ja\\\/#website\",\"url\":\"https:\\\/\\\/www.ypmfg.com\\\/ja\\\/\",\"name\":\"YP-MFG| Custom CNC Parts Made Exactly to Spec\",\"description\":\"\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.ypmfg.com\\\/ja\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"ja\"},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.ypmfg.com\\\/ja\\\/#\\\/schema\\\/person\\\/1ad07d09a6f18573f3b764ab0b4a8484\",\"name\":\"admin\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"ja\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5edfa2692bdacc5e6ee805c626c50cb44cebb065f092d9a1067d89f74dacd326?s=96&d=mm&r=x\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5edfa2692bdacc5e6ee805c626c50cb44cebb065f092d9a1067d89f74dacd326?s=96&d=mm&r=x\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5edfa2692bdacc5e6ee805c626c50cb44cebb065f092d9a1067d89f74dacd326?s=96&d=mm&r=x\",\"caption\":\"admin\"},\"sameAs\":[\"http:\\\/\\\/127.0.0.57\"],\"url\":\"https:\\\/\\\/www.ypmfg.com\\\/ja\\\/author\\\/admin\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"M03 Code in CNC: Meaning, Use & Errors","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.ypmfg.com\/ja\/2026\/10\/08\/m03-code-in-cnc-meaning-use-errors\/","og_locale":"ja_JP","og_type":"article","og_title":"M03 Code in CNC: Meaning, Use & Errors","og_description":"Quick answer:M03 in a CNC G-","og_url":"https:\/\/www.ypmfg.com\/ja\/2026\/10\/08\/m03-code-in-cnc-meaning-use-errors\/","og_site_name":"YP-MFG| Custom CNC Parts Made Exactly to Spec","article_published_time":"2026-10-08T08:08:16+00:00","og_image":[{"url":"https:\/\/www.ypmfg.com\/wp-content\/themes\/mb\/images_nengli\/cnc-route1-optimized.jpg","type":"","width":"","height":""}],"author":"admin","twitter_card":"summary_large_image","twitter_misc":{"\u57f7\u7b46\u8005":"admin","\u63a8\u5b9a\u8aad\u307f\u53d6\u308a\u6642\u9593":"4\u5206"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.ypmfg.com\/ja\/2026\/10\/08\/m03-code-in-cnc-meaning-use-errors\/#article","isPartOf":{"@id":"https:\/\/www.ypmfg.com\/ja\/2026\/10\/08\/m03-code-in-cnc-meaning-use-errors\/"},"author":{"name":"admin","@id":"https:\/\/www.ypmfg.com\/ja\/#\/schema\/person\/1ad07d09a6f18573f3b764ab0b4a8484"},"headline":"M03 Code in CNC: Meaning, Use & Errors","datePublished":"2026-10-08T08:08:16+00:00","mainEntityOfPage":{"@id":"https:\/\/www.ypmfg.com\/ja\/2026\/10\/08\/m03-code-in-cnc-meaning-use-errors\/"},"wordCount":870,"commentCount":0,"image":{"@id":"https:\/\/www.ypmfg.com\/ja\/2026\/10\/08\/m03-code-in-cnc-meaning-use-errors\/#primaryimage"},"thumbnailUrl":"https:\/\/www.ypmfg.com\/wp-content\/themes\/mb\/images_nengli\/cnc-route1-optimized.jpg","keywords":["CNC G-code","CNC Machining","Fanuc Controls","M03","Spindle Commands"],"articleSection":["Blog"],"inLanguage":"ja","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.ypmfg.com\/ja\/2026\/10\/08\/m03-code-in-cnc-meaning-use-errors\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.ypmfg.com\/ja\/2026\/10\/08\/m03-code-in-cnc-meaning-use-errors\/","url":"https:\/\/www.ypmfg.com\/ja\/2026\/10\/08\/m03-code-in-cnc-meaning-use-errors\/","name":"M03 Code in CNC: Meaning, Use & Errors","isPartOf":{"@id":"https:\/\/www.ypmfg.com\/ja\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.ypmfg.com\/ja\/2026\/10\/08\/m03-code-in-cnc-meaning-use-errors\/#primaryimage"},"image":{"@id":"https:\/\/www.ypmfg.com\/ja\/2026\/10\/08\/m03-code-in-cnc-meaning-use-errors\/#primaryimage"},"thumbnailUrl":"https:\/\/www.ypmfg.com\/wp-content\/themes\/mb\/images_nengli\/cnc-route1-optimized.jpg","datePublished":"2026-10-08T08:08:16+00:00","author":{"@id":"https:\/\/www.ypmfg.com\/ja\/#\/schema\/person\/1ad07d09a6f18573f3b764ab0b4a8484"},"breadcrumb":{"@id":"https:\/\/www.ypmfg.com\/ja\/2026\/10\/08\/m03-code-in-cnc-meaning-use-errors\/#breadcrumb"},"inLanguage":"ja","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.ypmfg.com\/ja\/2026\/10\/08\/m03-code-in-cnc-meaning-use-errors\/"]}]},{"@type":"ImageObject","inLanguage":"ja","@id":"https:\/\/www.ypmfg.com\/ja\/2026\/10\/08\/m03-code-in-cnc-meaning-use-errors\/#primaryimage","url":"https:\/\/www.ypmfg.com\/wp-content\/themes\/mb\/images_nengli\/cnc-route1-optimized.jpg","contentUrl":"https:\/\/www.ypmfg.com\/wp-content\/themes\/mb\/images_nengli\/cnc-route1-optimized.jpg","width":1189,"height":891},{"@type":"BreadcrumbList","@id":"https:\/\/www.ypmfg.com\/ja\/2026\/10\/08\/m03-code-in-cnc-meaning-use-errors\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.ypmfg.com\/"},{"@type":"ListItem","position":2,"name":"M03 Code in CNC: Meaning, Use & Errors"}]},{"@type":"WebSite","@id":"https:\/\/www.ypmfg.com\/ja\/#website","url":"https:\/\/www.ypmfg.com\/ja\/","name":"YP-MFG\uff5c\u4ed5\u69d8\u901a\u308a\u306b\u7cbe\u5bc6\u306b\u88fd\u9020\u3055\u308c\u305f\u7279\u6ce8CNC\u90e8\u54c1","description":"","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.ypmfg.com\/ja\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"ja"},{"@type":"Person","@id":"https:\/\/www.ypmfg.com\/ja\/#\/schema\/person\/1ad07d09a6f18573f3b764ab0b4a8484","name":"admin","image":{"@type":"ImageObject","inLanguage":"ja","@id":"https:\/\/secure.gravatar.com\/avatar\/5edfa2692bdacc5e6ee805c626c50cb44cebb065f092d9a1067d89f74dacd326?s=96&d=mm&r=x","url":"https:\/\/secure.gravatar.com\/avatar\/5edfa2692bdacc5e6ee805c626c50cb44cebb065f092d9a1067d89f74dacd326?s=96&d=mm&r=x","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/5edfa2692bdacc5e6ee805c626c50cb44cebb065f092d9a1067d89f74dacd326?s=96&d=mm&r=x","caption":"admin"},"sameAs":["http:\/\/127.0.0.57"],"url":"https:\/\/www.ypmfg.com\/ja\/author\/admin\/"}]}},"permalink_manager":null,"_links":{"self":[{"href":"https:\/\/www.ypmfg.com\/ja\/wp-json\/wp\/v2\/posts\/736","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.ypmfg.com\/ja\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.ypmfg.com\/ja\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.ypmfg.com\/ja\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.ypmfg.com\/ja\/wp-json\/wp\/v2\/comments?post=736"}],"version-history":[{"count":0,"href":"https:\/\/www.ypmfg.com\/ja\/wp-json\/wp\/v2\/posts\/736\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.ypmfg.com\/ja\/wp-json\/wp\/v2\/media\/737"}],"wp:attachment":[{"href":"https:\/\/www.ypmfg.com\/ja\/wp-json\/wp\/v2\/media?parent=736"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.ypmfg.com\/ja\/wp-json\/wp\/v2\/categories?post=736"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.ypmfg.com\/ja\/wp-json\/wp\/v2\/tags?post=736"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}