{"id":1152,"date":"2026-11-01T16:37:44","date_gmt":"2026-11-01T08:37:44","guid":{"rendered":"https:\/\/www.ypmfg.com\/2026\/11\/01\/6061-cnc-parts-specs-cost-guide\/"},"modified":"2026-11-01T16:37:44","modified_gmt":"2026-11-01T08:37:44","slug":"6061-cnc-parts-specs-cost-guide","status":"publish","type":"post","link":"https:\/\/www.ypmfg.com\/ko\/2026\/11\/01\/6061-cnc-parts-specs-cost-guide\/","title":{"rendered":"6061 CNC Parts: Specs & Cost Guide"},"content":{"rendered":"
\n

6061-T6 aluminum is the default alloy for most commercial and light-industrial turning and milling parts<\/strong>. It balances machinability, corrosion resistance, and post-machining anodizing capability well. For buyers specifying CNC 6061 parts<\/strong>, three decisions matter most: the temper (T6 vs. 6061-O), the tolerance band per feature, and the surface finish. Getting these right up front prevents rework and avoids paying for unnecessary precision on non-critical surfaces.<\/p>\n

Most buyers already know 6061 is a safe default. What trips them up is the gap between a part drawing and a quote that feels too high, or a part that arrives with tolerances looser or tighter than the application actually needs.<\/p>\n

Why 6061-T6 Is the Default for CNC Parts<\/h2>\n

6061-T6 is preferred over 6061-O for most machined components because the T6 temper provides roughly 40% higher tensile strength after stress-relief heat treatment. In practice, a 6061-T6 part holds dimensional stability longer, which matters for brackets, housings, and CNC milled aluminum components<\/strong> that see thermal cycling.<\/p>\n

~\uc5d0 \ub300\ud558\uc5ec CNC \uc120\ubc18 \uac00\uacf5 \ubd80\ud488<\/strong> with thin walls or intricate internal geometry, the alloy’s high machinability rating keeps cycle times low and tool wear manageable. This is why most \uac00\uacf5 \uc11c\ube44\uc2a4<\/strong> shops default to 6061-T6 when a buyer does not specify otherwise.<\/p>\n

Tolerances, Surface Finish, and Anodizing<\/h2>\n

\"aluminum6061_turningpoint_cnc<\/p>\n

The tolerance you request on each feature drives machining time and cost directly. A \u00b10.010 in (\u00b10.25 mm) band is standard for general-purpose parts. Tighter bands, such as \u00b10.003 in, add 20\u201340% to the cost on the affected features.<\/strong><\/p>\n

Surface finish follows the same logic. A standard as-machined finish lands around 32 \u00b5in Ra. If your part will be \uc591\uadf9 \uc0b0\ud654 \ucc98\ub9ac\ub41c \uc54c\ub8e8\ubbf8\ub284<\/strong>, specify the finish before anodizing; the process adds 0.0005\u20130.001 in per side and can close a gap or interfere with a fit if not accounted for.<\/p>\n

YPMFG<\/a><\/strong> supports buyers who need a quick engineering review of tolerance callouts before batch production begins. Sending your drawing or 3D file for a pre-production check can flag interference issues early.<\/p>\n

What Actually Drives Cost on 6061 CNC Parts<\/h2>\n

Cost is not set by a single factor. The table below shows the levers that move the number the most:<\/p>\n\n\n\n\n\n\n\n
\ube44\uc6a9 \uc694\uc778<\/th>\nLow-Cost Scenario<\/th>\nHigh-Cost Scenario<\/th>\n\uc77c\ubc18\uc801\uc778 \uc601\ud5a5<\/th>\n<\/tr>\n
Alloy temper<\/td>\n6061-O (soft, fast cut)<\/td>\n6061-T651 (high-stress)<\/td>\n10\u201325% cycle-time difference<\/td>\n<\/tr>\n
\ud5c8\uc6a9 \ubc94\uc704<\/td>\n\u00b10.010 in on all features<\/td>\n\u00b10.002 in on selected features<\/td>\n+20\u201340% on tight features<\/td>\n<\/tr>\n
\uae30\ud558\ud559<\/td>\nSimple turning, few features<\/td>\n5-axis milling, thin walls<\/td>\n2\u20135\u00d7 setup and cycle time<\/td>\n<\/tr>\n
Post-machining<\/td>\nAs-machined, no finish<\/td>\nType II anodize + passivation<\/td>\n+$0.50\u2013$3.00 per part<\/td>\n<\/tr>\n
\ubc30\uce58 \ud06c\uae30<\/td>\n500+ units<\/td>\n1\u201310 prototypes<\/td>\nUnit cost drops 30\u201360% at volume<\/td>\n<\/tr>\n<\/table>\n

\"aluminum6061_turningpoint_cnc<\/p>\n

After reviewing a CNC machining quote<\/strong>,check which columns the supplier applied. A quote that does not break cost down by feature complexity or finish is harder to compare across suppliers.<\/p>\n

Practical Questions Before You Place an Order<\/h2>\n

Should I specify 6061-T6 or just 6061 on my drawing?<\/strong><\/p>\n

In most cases, specify 6061-T6 explicitly. “6061” without a temper often defaults to the as-extruded O condition, which is softer and more prone to dimensional shift during machining. If your part sees cyclic loading or temperature swings, T6 or T651 is the safer call.<\/p>\n

What is the minimum wall thickness for 6061 CNC milled parts?<\/strong><\/p>\n

Walls under 0.5 mm are possible but require careful programming to manage springback and chatter. For CNC turned aluminum parts<\/strong>, minimum practical diameters depend on the chuck grip; below roughly 6 mm, a live center or special fixture is usually needed.<\/p>\n

Will anodizing affect my dimensional tolerances?<\/strong><\/p>\n

Yes. Type II anodizing adds 5\u201325 \u00b5m per surface. If you have a critical fit, specify the tolerance on the base metal and reserve clearance in the drawing so the anodize layer does not close the gap.<\/strong><\/p>\n

How do I verify material authenticity on received parts?<\/strong><\/p>\n

Request a mill cert (EN 10204 3.1 minimum) for each batch. For high-criticality applications, a spot-check with a portable XRF analyzer confirms the alloy signature before acceptance.<\/p>\n

\uc801\ud569\ud55c \uac00\uacf5 \ud30c\ud2b8\ub108 \uc120\uc815<\/h2>\n

The right supplier for CNC turning and milling parts in aluminum 6061<\/strong> is not the cheapest one; it is the one who will flag a design issue before you pay for it. Send your 3D model or drawing to YPMFG<\/strong> and request a no-obligation engineering review. The team can confirm feasibility, suggest tolerance adjustments, and return a line-item quote with material and finish assumptions made explicit. That single step usually saves more money than any other decision in the procurement chain.<\/p>\n<\/div>","protected":false},"excerpt":{"rendered":"

6061-T6 aluminum is the default alloy for most commercial and light-<\/p>","protected":false},"author":1,"featured_media":1153,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[44],"tags":[859,861,527,860,124],"class_list":["post-1152","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog","tag-6061-cnc-parts","tag-anodizing","tag-machining-tolerances","tag-t6-aluminum","tag-ypmfg"],"yoast_head":"\n6061 CNC Parts: Specs & Cost Guide<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.ypmfg.com\/ko\/2026\/11\/01\/6061-cnc-parts-specs-cost-guide\/\" \/>\n<meta property=\"og:locale\" content=\"ko_KR\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"6061 CNC Parts: Specs & Cost Guide\" \/>\n<meta property=\"og:description\" content=\"6061-T6 aluminum is the default alloy for most commercial and light-\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.ypmfg.com\/ko\/2026\/11\/01\/6061-cnc-parts-specs-cost-guide\/\" \/>\n<meta property=\"og:site_name\" content=\"YP-MFG| Custom CNC Parts Made Exactly to Spec\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-01T08:37:44+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.ypmfg.com\/wp-content\/themes\/mb\/images_nengli\/industrial-cabinets-optimized.png\" \/>\n<meta name=\"author\" content=\"admin\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"\uae00\uc4f4\uc774\" \/>\n\t<meta name=\"twitter:data1\" content=\"admin\" \/>\n\t<meta name=\"twitter:label2\" content=\"\uc608\uc0c1 \ub418\ub294 \ud310\ub3c5 \uc2dc\uac04\" \/>\n\t<meta name=\"twitter:data2\" content=\"4\ubd84\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.ypmfg.com\\\/ko\\\/2026\\\/11\\\/01\\\/6061-cnc-parts-specs-cost-guide\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.ypmfg.com\\\/ko\\\/2026\\\/11\\\/01\\\/6061-cnc-parts-specs-cost-guide\\\/\"},\"author\":{\"name\":\"admin\",\"@id\":\"https:\\\/\\\/www.ypmfg.com\\\/ko\\\/#\\\/schema\\\/person\\\/1ad07d09a6f18573f3b764ab0b4a8484\"},\"headline\":\"6061 CNC Parts: Specs & Cost Guide\",\"datePublished\":\"2026-11-01T08:37:44+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.ypmfg.com\\\/ko\\\/2026\\\/11\\\/01\\\/6061-cnc-parts-specs-cost-guide\\\/\"},\"wordCount\":713,\"commentCount\":0,\"image\":{\"@id\":\"https:\\\/\\\/www.ypmfg.com\\\/ko\\\/2026\\\/11\\\/01\\\/6061-cnc-parts-specs-cost-guide\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.ypmfg.com\\\/wp-content\\\/themes\\\/mb\\\/images_nengli\\\/industrial-cabinets-optimized.png\",\"keywords\":[\"6061 CNC Parts\",\"Anodizing\",\"Machining Tolerances\",\"T6 Aluminum\",\"YPMFG\"],\"articleSection\":[\"Blog\"],\"inLanguage\":\"ko-KR\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/www.ypmfg.com\\\/ko\\\/2026\\\/11\\\/01\\\/6061-cnc-parts-specs-cost-guide\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.ypmfg.com\\\/ko\\\/2026\\\/11\\\/01\\\/6061-cnc-parts-specs-cost-guide\\\/\",\"url\":\"https:\\\/\\\/www.ypmfg.com\\\/ko\\\/2026\\\/11\\\/01\\\/6061-cnc-parts-specs-cost-guide\\\/\",\"name\":\"6061 CNC Parts: Specs & Cost Guide\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.ypmfg.com\\\/ko\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.ypmfg.com\\\/ko\\\/2026\\\/11\\\/01\\\/6061-cnc-parts-specs-cost-guide\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.ypmfg.com\\\/ko\\\/2026\\\/11\\\/01\\\/6061-cnc-parts-specs-cost-guide\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.ypmfg.com\\\/wp-content\\\/themes\\\/mb\\\/images_nengli\\\/industrial-cabinets-optimized.png\",\"datePublished\":\"2026-11-01T08:37:44+00:00\",\"author\":{\"@id\":\"https:\\\/\\\/www.ypmfg.com\\\/ko\\\/#\\\/schema\\\/person\\\/1ad07d09a6f18573f3b764ab0b4a8484\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.ypmfg.com\\\/ko\\\/2026\\\/11\\\/01\\\/6061-cnc-parts-specs-cost-guide\\\/#breadcrumb\"},\"inLanguage\":\"ko-KR\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.ypmfg.com\\\/ko\\\/2026\\\/11\\\/01\\\/6061-cnc-parts-specs-cost-guide\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"ko-KR\",\"@id\":\"https:\\\/\\\/www.ypmfg.com\\\/ko\\\/2026\\\/11\\\/01\\\/6061-cnc-parts-specs-cost-guide\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.ypmfg.com\\\/wp-content\\\/themes\\\/mb\\\/images_nengli\\\/industrial-cabinets-optimized.png\",\"contentUrl\":\"https:\\\/\\\/www.ypmfg.com\\\/wp-content\\\/themes\\\/mb\\\/images_nengli\\\/industrial-cabinets-optimized.png\",\"width\":1600,\"height\":1491},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.ypmfg.com\\\/ko\\\/2026\\\/11\\\/01\\\/6061-cnc-parts-specs-cost-guide\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.ypmfg.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"6061 CNC Parts: Specs & Cost Guide\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.ypmfg.com\\\/ko\\\/#website\",\"url\":\"https:\\\/\\\/www.ypmfg.com\\\/ko\\\/\",\"name\":\"YP-MFG| Custom CNC Parts Made Exactly to Spec\",\"description\":\"\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.ypmfg.com\\\/ko\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"ko-KR\"},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.ypmfg.com\\\/ko\\\/#\\\/schema\\\/person\\\/1ad07d09a6f18573f3b764ab0b4a8484\",\"name\":\"admin\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"ko-KR\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5edfa2692bdacc5e6ee805c626c50cb44cebb065f092d9a1067d89f74dacd326?s=96&d=mm&r=x\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5edfa2692bdacc5e6ee805c626c50cb44cebb065f092d9a1067d89f74dacd326?s=96&d=mm&r=x\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5edfa2692bdacc5e6ee805c626c50cb44cebb065f092d9a1067d89f74dacd326?s=96&d=mm&r=x\",\"caption\":\"admin\"},\"sameAs\":[\"http:\\\/\\\/127.0.0.57\"],\"url\":\"https:\\\/\\\/www.ypmfg.com\\\/ko\\\/author\\\/admin\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"6061 CNC Parts: Specs & Cost Guide","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.ypmfg.com\/ko\/2026\/11\/01\/6061-cnc-parts-specs-cost-guide\/","og_locale":"ko_KR","og_type":"article","og_title":"6061 CNC Parts: Specs & Cost Guide","og_description":"6061-T6 aluminum is the default alloy for most commercial and light-","og_url":"https:\/\/www.ypmfg.com\/ko\/2026\/11\/01\/6061-cnc-parts-specs-cost-guide\/","og_site_name":"YP-MFG| Custom CNC Parts Made Exactly to Spec","article_published_time":"2026-11-01T08:37:44+00:00","og_image":[{"url":"https:\/\/www.ypmfg.com\/wp-content\/themes\/mb\/images_nengli\/industrial-cabinets-optimized.png","type":"","width":"","height":""}],"author":"admin","twitter_card":"summary_large_image","twitter_misc":{"\uae00\uc4f4\uc774":"admin","\uc608\uc0c1 \ub418\ub294 \ud310\ub3c5 \uc2dc\uac04":"4\ubd84"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.ypmfg.com\/ko\/2026\/11\/01\/6061-cnc-parts-specs-cost-guide\/#article","isPartOf":{"@id":"https:\/\/www.ypmfg.com\/ko\/2026\/11\/01\/6061-cnc-parts-specs-cost-guide\/"},"author":{"name":"admin","@id":"https:\/\/www.ypmfg.com\/ko\/#\/schema\/person\/1ad07d09a6f18573f3b764ab0b4a8484"},"headline":"6061 CNC Parts: Specs & Cost Guide","datePublished":"2026-11-01T08:37:44+00:00","mainEntityOfPage":{"@id":"https:\/\/www.ypmfg.com\/ko\/2026\/11\/01\/6061-cnc-parts-specs-cost-guide\/"},"wordCount":713,"commentCount":0,"image":{"@id":"https:\/\/www.ypmfg.com\/ko\/2026\/11\/01\/6061-cnc-parts-specs-cost-guide\/#primaryimage"},"thumbnailUrl":"https:\/\/www.ypmfg.com\/wp-content\/themes\/mb\/images_nengli\/industrial-cabinets-optimized.png","keywords":["6061 CNC Parts","Anodizing","Machining Tolerances","T6 Aluminum","YPMFG"],"articleSection":["Blog"],"inLanguage":"ko-KR","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.ypmfg.com\/ko\/2026\/11\/01\/6061-cnc-parts-specs-cost-guide\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.ypmfg.com\/ko\/2026\/11\/01\/6061-cnc-parts-specs-cost-guide\/","url":"https:\/\/www.ypmfg.com\/ko\/2026\/11\/01\/6061-cnc-parts-specs-cost-guide\/","name":"6061 CNC Parts: Specs & Cost Guide","isPartOf":{"@id":"https:\/\/www.ypmfg.com\/ko\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.ypmfg.com\/ko\/2026\/11\/01\/6061-cnc-parts-specs-cost-guide\/#primaryimage"},"image":{"@id":"https:\/\/www.ypmfg.com\/ko\/2026\/11\/01\/6061-cnc-parts-specs-cost-guide\/#primaryimage"},"thumbnailUrl":"https:\/\/www.ypmfg.com\/wp-content\/themes\/mb\/images_nengli\/industrial-cabinets-optimized.png","datePublished":"2026-11-01T08:37:44+00:00","author":{"@id":"https:\/\/www.ypmfg.com\/ko\/#\/schema\/person\/1ad07d09a6f18573f3b764ab0b4a8484"},"breadcrumb":{"@id":"https:\/\/www.ypmfg.com\/ko\/2026\/11\/01\/6061-cnc-parts-specs-cost-guide\/#breadcrumb"},"inLanguage":"ko-KR","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.ypmfg.com\/ko\/2026\/11\/01\/6061-cnc-parts-specs-cost-guide\/"]}]},{"@type":"ImageObject","inLanguage":"ko-KR","@id":"https:\/\/www.ypmfg.com\/ko\/2026\/11\/01\/6061-cnc-parts-specs-cost-guide\/#primaryimage","url":"https:\/\/www.ypmfg.com\/wp-content\/themes\/mb\/images_nengli\/industrial-cabinets-optimized.png","contentUrl":"https:\/\/www.ypmfg.com\/wp-content\/themes\/mb\/images_nengli\/industrial-cabinets-optimized.png","width":1600,"height":1491},{"@type":"BreadcrumbList","@id":"https:\/\/www.ypmfg.com\/ko\/2026\/11\/01\/6061-cnc-parts-specs-cost-guide\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.ypmfg.com\/"},{"@type":"ListItem","position":2,"name":"6061 CNC Parts: Specs & Cost Guide"}]},{"@type":"WebSite","@id":"https:\/\/www.ypmfg.com\/ko\/#website","url":"https:\/\/www.ypmfg.com\/ko\/","name":"YP-MFG | \uc0ac\uc591\uc5d0 \uc815\ud655\ud788 \ub9de\ucdb0 \uc81c\uc791\ub41c \ub9de\ucda4\ud615 CNC \ubd80\ud488","description":"","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.ypmfg.com\/ko\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"ko-KR"},{"@type":"Person","@id":"https:\/\/www.ypmfg.com\/ko\/#\/schema\/person\/1ad07d09a6f18573f3b764ab0b4a8484","name":"\uad00\ub9ac\uc790","image":{"@type":"ImageObject","inLanguage":"ko-KR","@id":"https:\/\/secure.gravatar.com\/avatar\/5edfa2692bdacc5e6ee805c626c50cb44cebb065f092d9a1067d89f74dacd326?s=96&d=mm&r=x","url":"https:\/\/secure.gravatar.com\/avatar\/5edfa2692bdacc5e6ee805c626c50cb44cebb065f092d9a1067d89f74dacd326?s=96&d=mm&r=x","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/5edfa2692bdacc5e6ee805c626c50cb44cebb065f092d9a1067d89f74dacd326?s=96&d=mm&r=x","caption":"admin"},"sameAs":["http:\/\/127.0.0.57"],"url":"https:\/\/www.ypmfg.com\/ko\/author\/admin\/"}]}},"permalink_manager":null,"_links":{"self":[{"href":"https:\/\/www.ypmfg.com\/ko\/wp-json\/wp\/v2\/posts\/1152","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.ypmfg.com\/ko\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.ypmfg.com\/ko\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.ypmfg.com\/ko\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.ypmfg.com\/ko\/wp-json\/wp\/v2\/comments?post=1152"}],"version-history":[{"count":0,"href":"https:\/\/www.ypmfg.com\/ko\/wp-json\/wp\/v2\/posts\/1152\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.ypmfg.com\/ko\/wp-json\/wp\/v2\/media\/1153"}],"wp:attachment":[{"href":"https:\/\/www.ypmfg.com\/ko\/wp-json\/wp\/v2\/media?parent=1152"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.ypmfg.com\/ko\/wp-json\/wp\/v2\/categories?post=1152"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.ypmfg.com\/ko\/wp-json\/wp\/v2\/tags?post=1152"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}