{"id":1417,"date":"2026-11-16T11:36:18","date_gmt":"2026-11-16T03:36:18","guid":{"rendered":"https:\/\/www.ypmfg.com\/2026\/11\/16\/what-are-secondary-machining-operations\/"},"modified":"2026-11-16T11:36:18","modified_gmt":"2026-11-16T03:36:18","slug":"what-are-secondary-machining-operations","status":"publish","type":"post","link":"https:\/\/www.ypmfg.com\/ru\/2026\/11\/16\/what-are-secondary-machining-operations\/","title":{"rendered":"What Are Secondary Machining Operations?"},"content":{"rendered":"<div style=\"margin: 0 auto;padding: 20px;font-family: -apple-system, BlinkMacSystemFont, &#039;Segoe UI&#039;, Roboto, &#039;Helvetica Neue&#039;, Arial, sans-serif\">\n<blockquote style=\"margin: 1.6em 0;padding: 1.2em 1.5em;background: linear-gradient(90deg, #faf2f4 0%, #fff 100%);border-left: 4px solid #d05570;color: #444444;font-style: italic;border-radius: 0 8px 8px 0\">\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">Secondary machining operations are the finishing, re-fixturing, and follow-up steps that run after your primary cut. A typical CNC part needs 1 to 3 secondary setups before it ships. Each setup adds cost but unlocks features a single setup cannot reach.<\/p>\n<\/blockquote>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">You spec a part with features on three faces. The primary CNC pass handles two. The third face needs a flip or a second clamp. That flip is a <strong style=\"font-weight: 600;color: #b32050\">secondary machining operation<\/strong>. It sounds simple, but it shifts your lead time, fixturing budget, and whether the part holds <strong style=\"font-weight: 600;color: #b32050\"><a href=\"\/ru\/2026\/10\/04\/%d0%bf%d1%80%d0%be%d0%b3%d1%80%d0%b0%d0%bc%d0%bc%d0%b8%d1%80%d0%be%d0%b2%d0%b0%d0%bd%d0%b8%d0%b5-cad-cnc-5-%d0%bc%d0%be%d0%bc%d0%b5%d0%bd%d1%82%d0%be%d0%b2-%d0%bd%d0%b0-%d0%ba%d0%be%d1%82%d0%be\/\" title=\"\u041e\u0431\u0440\u0430\u0431\u043e\u0442\u043a\u0430 \u043d\u0430 \u0441\u0442\u0430\u043d\u043a\u0430\u0445 \u0441 \u0427\u041f\u0423\" target=\"_blank\">\u041e\u0431\u0440\u0430\u0431\u043e\u0442\u043a\u0430 \u043d\u0430 \u0441\u0442\u0430\u043d\u043a\u0430\u0445 \u0441 \u0427\u041f\u0423<\/a> \u0442\u0435\u0440\u043f\u0438\u043c\u043e\u0441\u0442\u044c<\/strong> across datums. YPMFG sees this decision come up in nearly every quote request.<\/p>\n<h2 style=\"font-size: 20px;font-weight: 600;margin: 1.4em 0 0.5em;color: #b32050;line-height: 1.4\">Key Takeaways<\/h2>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">\n<ul style=\"margin: 1.2em 0;padding-left: 1.8em;line-height: 1.9;list-style-type: disc\">\n<li style=\"margin: 0.5em 0;color: #222222\"><strong style=\"font-weight: 600;color: #b32050\">Setup count<\/strong>: A part with features on 3 or more faces typically needs 2 to 3 secondary operations minimum.<\/li>\n<li style=\"margin: 0.5em 0;color: #222222\"><strong style=\"font-weight: 600;color: #b32050\">Cost driver<\/strong>: Each secondary setup adds fixturing and inspection time, often doubling per-part machining cost.<\/li>\n<li style=\"margin: 0.5em 0;color: #222222\"><strong style=\"font-weight: 600;color: #b32050\">Tolerance risk<\/strong>: Re-fixturing introduces a new datum; tolerance on the re-fixtured face can drift past spec.<\/li>\n<li style=\"margin: 0.5em 0;color: #222222\"><strong style=\"font-weight: 600;color: #b32050\">\u0412\u044b\u0431\u043e\u0440 \u043c\u0430\u0442\u0435\u0440\u0438\u0430\u043b\u0430<\/strong>: Softer alloys like 6061 aluminum forgive secondary operations; H13 steel compounds errors fast.<\/li>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\"><\/ul>\n<\/p>\n<h2 style=\"font-size: 20px;font-weight: 600;margin: 1.4em 0 0.5em;color: #b32050;line-height: 1.4\">Primary Versus Secondary: A Quick Comparison<\/h2>\n<table style=\"width: 100%;border-collapse: collapse;margin: 1.6em 0;border-radius: 10px 10px 0 0;overflow: hidden\">\n<thead>\n<tr>\n<th style=\"background: #9e1840;color: #fff;padding: 14px 16px;text-align: left;font-weight: 600;border: 1px solid #e0e0e0\">\u0420\u0430\u0437\u043c\u0435\u0440<\/th>\n<th style=\"background: #9e1840;color: #fff;padding: 14px 16px;text-align: left;font-weight: 600;border: 1px solid #e0e0e0\">\u041e\u0441\u043d\u043e\u0432\u043d\u0430\u044f \u043e\u043f\u0435\u0440\u0430\u0446\u0438\u044f<\/th>\n<th style=\"background: #9e1840;color: #fff;padding: 14px 16px;text-align: left;font-weight: 600;border: 1px solid #e0e0e0\">Secondary Operation<\/th>\n<th style=\"background: #9e1840;color: #fff;padding: 14px 16px;text-align: left;font-weight: 600;border: 1px solid #e0e0e0\">Decision Threshold<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"padding: 12px 16px;color: #222222;border: 1px solid #e0e0e0\">Fixturing<\/td>\n<td style=\"padding: 12px 16px;color: #222222;border: 1px solid #e0e0e0\">Workpiece in original clamp<\/td>\n<td style=\"padding: 12px 16px;color: #222222;border: 1px solid #e0e0e0\">Re-clamped or flipped<\/td>\n<td style=\"padding: 12px 16px;color: #222222;border: 1px solid #e0e0e0\">Face count \u2265 3<\/td>\n<\/tr>\n<tr>\n<td style=\"padding: 12px 16px;color: #222222;border: 1px solid #e0e0e0\">Datum<\/td>\n<td style=\"padding: 12px 16px;color: #222222;border: 1px solid #e0e0e0\">Original layout datums<\/td>\n<td style=\"padding: 12px 16px;color: #222222;border: 1px solid #e0e0e0\">New reference, may shift<\/td>\n<td style=\"padding: 12px 16px;color: #222222;border: 1px solid #e0e0e0\">Tolerance &lt; 0.01 mm<\/td>\n<\/tr>\n<tr>\n<td style=\"padding: 12px 16px;color: #222222;border: 1px solid #e0e0e0\">Tools<\/td>\n<td style=\"padding: 12px 16px;color: #222222;border: 1px solid #e0e0e0\">Full-size end mills, roughing<\/td>\n<td style=\"padding: 12px 16px;color: #222222;border: 1px solid #e0e0e0\">Smaller finishers, drills, taps<\/td>\n<td style=\"padding: 12px 16px;color: #222222;border: 1px solid #e0e0e0\">Finish &lt; Ra 1.6 \u03bcm<\/td>\n<\/tr>\n<tr>\n<td style=\"padding: 12px 16px;color: #222222;border: 1px solid #e0e0e0\">\u0421\u0440\u043e\u043a \u0432\u044b\u043f\u043e\u043b\u043d\u0435\u043d\u0438\u044f \u0437\u0430\u043a\u0430\u0437\u0430<\/td>\n<td style=\"padding: 12px 16px;color: #222222;border: 1px solid #e0e0e0\">Single queue slot<\/td>\n<td style=\"padding: 12px 16px;color: #222222;border: 1px solid #e0e0e0\">Sequential, adds 1 to 2 days<\/td>\n<td style=\"padding: 12px 16px;color: #222222;border: 1px solid #e0e0e0\">3-day sample vs 15-day batch<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">If your part has features on fewer than 3 faces and your <strong style=\"font-weight: 600;color: #b32050\">\u0434\u043e\u043f\u0443\u0441\u043a \u043d\u0430 \u043e\u0431\u0440\u0430\u0431\u043e\u0442\u043a\u0443<\/strong> sits at 0.05 mm or looser, one setup covers everything. Past that, plan for secondary work.<\/p>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\"><img decoding=\"async\" src=\"https:\/\/www.ypmfg.com\/wp-content\/themes\/mb\/images_nengli\/wire-edm-video-cover.webp\" alt=\"sd\u9ad8\u8fbeoperations_operations_secondary machining operations\" style=\"width: 100%;max-width: 960px;height: auto;display: block;margin: 1.8em auto;border-radius: 0px\"><\/p>\n<h2 style=\"font-size: 20px;font-weight: 600;margin: 1.4em 0 0.5em;color: #b32050;line-height: 1.4\">What Counts as a Secondary Machining Operation?<\/h2>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">Any step that runs after the primary material-removal pass and requires a new setup, new tool, or new datum counts. Common examples include flipping the part to machine the back face, running a finish turn after a rough mill,drilling from a second orientation, and a post-machining deburr or chamfer pass.<\/p>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">The physical reason is straightforward. A <strong style=\"font-weight: 600;color: #b32050\">five-axis CNC<\/strong> spindle reaches features only from the direction the tool approaches. A through-hole needs two sides. A pocket with a side wall below the clamp line needs a flip. The machine cannot reach what the fixture blocks.<\/p>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">\n<ul style=\"margin: 1.2em 0;padding-left: 1.8em;line-height: 1.9;list-style-type: disc\">\n<li style=\"margin: 0.5em 0;color: #222222\"><strong style=\"font-weight: 600;color: #b32050\">Re-fixturing<\/strong>: Part moves to a new clamp. New datum, new alignment risk.<\/li>\n<li style=\"margin: 0.5em 0;color: #222222\"><strong style=\"font-weight: 600;color: #b32050\">Back-side machining<\/strong>: Features on the face opposite the primary setup.<\/li>\n<li style=\"margin: 0.5em 0;color: #222222\"><strong style=\"font-weight: 600;color: #b32050\">Finishing passes<\/strong>: A lighter cut to hit surface finish below Ra 1.6 micrometers.<\/li>\n<li style=\"margin: 0.5em 0;color: #222222\"><strong style=\"font-weight: 600;color: #b32050\">Secondary drilling or tapping<\/strong>: Holes from a face not accessible in the first setup.<\/li>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\"><\/ul>\n<\/p>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">What you cannot do: machine a closed internal cavity in a single setup if the clamp physically covers it. You must remove the clamp, re-fix, and cut the cavity. That is a secondary operation by definition.<\/p>\n<h2 style=\"font-size: 20px;font-weight: 600;margin: 1.4em 0 0.5em;color: #b32050;line-height: 1.4\">How Do Secondary Operations Affect Tolerance and Cost?<\/h2>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">Every re-fix introduces a new datum. The tolerance stack between the primary and secondary datums is what your engineer must control. A 0.01 mm hold on a re-fixtured face is achievable, but it demands a precision clamp and a post-fix inspection gate.<\/p>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\"><img decoding=\"async\" src=\"https:\/\/www.ypmfg.com\/wp-content\/themes\/mb\/images_nengli\/blog-simultaneous-5-axis-vs-32-machining.webp\" alt=\"sd\u9ad8\u8fbeoperations_secondary machining operations_operations\" style=\"width: 100%;max-width: 960px;height: auto;display: block;margin: 1.8em auto;border-radius: 0px\"><\/p>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">Cost scales with setup count. Roughing dominates the first pass. A secondary finishing pass adds tool-change time, a shorter cycle, and an inspection step. For a batch of 500 parts, each extra setup typically adds 1 to 2 days of queue and a measurable per-part cost increase depending on complexity.<\/p>\n<blockquote style=\"margin: 1.6em 0;padding: 1.2em 1.5em;background: linear-gradient(90deg, #faf2f4 0%, #fff 100%);border-left: 4px solid #d05570;color: #444444;font-style: italic;border-radius: 0 8px 8px 0\">\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">Material matters. Aluminum 6061 is forgiving; a slightly loose clamp still holds. Hardened 316L stainless or H13 steel demands tighter clamping because thermal drift during the secondary cut can push the part out of spec.<\/p>\n<\/blockquote>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">If your drawing calls for <strong style=\"font-weight: 600;color: #b32050\">ISO 2768-m<\/strong> general tolerances, secondary work is manageable. At tighter than 0.01 mm, you need a documented fixturing plan and a post-fix CMM check. No clamp design eliminates all secondary drift. You reduce it to a risk band, not to zero.<\/p>\n<h2 style=\"font-size: 20px;font-weight: 600;margin: 1.4em 0 0.5em;color: #b32050;line-height: 1.4\">When Should You Combine Primary and Secondary Work in One Job?<\/h2>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">The answer depends on part geometry and tolerance. If all features face one direction and your tolerance is 0.05 mm or looser, a single setup finishes the part. If you need a through-hole, a back-face pocket, or a cross-drilled hole, the part must move. That move is the secondary operation.<\/p>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">A practical rule: count the accessible faces. One face, one setup. Two faces on opposite sides, two setups. Three or more faces, plan 2 to 3 secondary operations. Each additional face adds fixturing time and a new alignment check. YPMFG can review your drawing and flag which features force a secondary pass before you commit to a quote.<\/p>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">Heat treatment changes the equation. A part hardened after machining needs a final grinding or finishing pass on the work-hardened surface. That grinding is a secondary operation in its own right, and the post-heat-treat tolerance is harder to hold than the pre-treat one.<\/p>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">What you cannot avoid: a complex housing with features on 4 faces will need at least 2 secondary setups regardless of machine capability. A five-axis spindle reduces setups for contour work but does not eliminate the need to access a buried face from a new direction.<\/p>\n<h2 style=\"font-size: 20px;font-weight: 600;margin: 1.4em 0 0.5em;color: #b32050;line-height: 1.4\">How a Typical Multi-Face Part Moves Through Secondary Operations<\/h2>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">Take a machined 6061 aluminum housing with a top pocket, two side mounting faces, and a bottom through-hole. The process route works like this:<\/p>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">\n<ol style=\"margin: 1.2em 0;padding-left: 1.8em;line-height: 1.9;list-style-type: decimal\">\n<li style=\"margin: 0.5em 0;color: #222222\"><strong style=\"font-weight: 600;color: #b32050\">Primary setup<\/strong>: Clamp on the bottom face. Mill the top pocket and both side faces with a 10 mm end mill, roughing then finishing. Full pocket depth in one pass.<\/li>\n<li style=\"margin: 0.5em 0;color: #222222\"><strong style=\"font-weight: 600;color: #b32050\">Secondary setup<\/strong>: Flip to the bottom face. Drill and tap the through-holes. Inspect top-face dimensions against the original datum before drilling.<\/li>\n<li style=\"margin: 0.5em 0;color: #222222\"><strong style=\"font-weight: 600;color: #b32050\">Deburr and inspect<\/strong>: Remove sharp edges. Run a CMM check on critical features. Package with an FAI report for the first article.<\/li>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\"><\/ol>\n<\/p>\n<blockquote style=\"margin: 1.6em 0;padding: 1.2em 1.5em;background: linear-gradient(90deg, #faf2f4 0%, #fff 100%);border-left: 4px solid #d05570;color: #444444;font-style: italic;border-radius: 0 8px 8px 0\">\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">Process Route Reference: YPMFG process library, reviewed against published tooling data. Client-specific data withheld per NDA.<\/p>\n<\/blockquote>\n<h2 style=\"font-size: 20px;font-weight: 600;margin: 1.4em 0 0.5em;color: #b32050;line-height: 1.4\">Practical Questions Before You Spec Secondary Operations<\/h2>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\"><strong style=\"font-weight: 600;color: #b32050\">Do I always need a secondary operation?<\/strong> No. If every feature is reachable from one face and your <strong style=\"font-weight: 600;color: #b32050\">\u0434\u043e\u043f\u0443\u0441\u043a \u043d\u0430 \u043e\u0431\u0440\u0430\u0431\u043e\u0442\u043a\u0443<\/strong> is 0.05 mm or looser, a single setup handles the job.<\/p>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\"><strong style=\"font-weight: 600;color: #b32050\">Can a five-axis machine eliminate all secondary setups?<\/strong> It cannot. A five-axis spindle improves reach on contoured surfaces, but a face fully hidden by the clamp still requires a re-fix or a separate operation.<\/p>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\"><strong style=\"font-weight: 600;color: #b32050\">How much extra cost should I expect?<\/strong> Depending on part geometry and batch size, each secondary setup often adds a meaningful share of total machining time. Send your drawing to YPMFG and you will get a setup count with the quote.<\/p>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\"><strong style=\"font-weight: 600;color: #b32050\">What drawing callouts prevent secondary-operation problems?<\/strong> State your datum scheme, specify which face is the primary reference, and call out <strong style=\"font-weight: 600;color: #b32050\">ASME Y14.5<\/strong> geometric tolerances on re-fixtured features. This removes ambiguity at the fixture stage.<\/p>\n<h2 style=\"font-size: 20px;font-weight: 600;margin: 1.4em 0 0.5em;color: #b32050;line-height: 1.4\">Making a Smarter Decision on Secondary Work<\/h2>\n<p style=\"margin: 1.25em 0;line-height: 1.9;font-size: 16px;color: #222222;text-align: justify;letter-spacing: 0.02em\">The cost of a missed secondary setup shows up in rework, rejected batches, or a part that barely passes inspection. The cost of planning one is a few extra minutes of fixture design and a clearer drawing. YPMFG reviews your specification before quoting and flags every feature that forces a re-fix, a new datum, or a finishing pass. Send your drawing and tolerance callouts to YPMFG for an engineering review. You get a setup plan, a lead-time estimate, and a first-article inspection outline before any metal moves.<\/p>\n<\/div>","protected":false},"excerpt":{"rendered":"<p>Secondary machining operations are the finishing, re-fixturing, and follow-<\/p>","protected":false},"author":1,"featured_media":1418,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[44],"tags":[406,725,946,1103,1104],"class_list":["post-1417","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog","tag-cnc-machining","tag-cost-analysis","tag-tolerance-management","tag-secondary-machining-operations","tag-fixturing"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.3 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>What Are Secondary Machining Operations?<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.ypmfg.com\/ru\/2026\/11\/16\/what-are-secondary-machining-operations\/\" \/>\n<meta property=\"og:locale\" content=\"ru_RU\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"What Are Secondary Machining Operations?\" \/>\n<meta property=\"og:description\" content=\"Secondary machining operations are the finishing, re-fixturing, and follow-\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.ypmfg.com\/ru\/2026\/11\/16\/what-are-secondary-machining-operations\/\" \/>\n<meta property=\"og:site_name\" content=\"YP-MFG| Custom CNC Parts Made Exactly to Spec\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-16T03:36:18+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.ypmfg.com\/wp-content\/themes\/mb\/images_nengli\/wire-edm-video-cover.webp\" \/>\n<meta name=\"author\" content=\"admin\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"\u041d\u0430\u043f\u0438\u0441\u0430\u043d\u043e \u0430\u0432\u0442\u043e\u0440\u043e\u043c\" \/>\n\t<meta name=\"twitter:data1\" content=\"admin\" \/>\n\t<meta name=\"twitter:label2\" content=\"\u041f\u0440\u0438\u043c\u0435\u0440\u043d\u043e\u0435 \u0432\u0440\u0435\u043c\u044f \u0434\u043b\u044f \u0447\u0442\u0435\u043d\u0438\u044f\" \/>\n\t<meta name=\"twitter:data2\" content=\"6 \u043c\u0438\u043d\u0443\u0442\" \/>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"What Are Secondary Machining Operations?","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.ypmfg.com\/ru\/2026\/11\/16\/what-are-secondary-machining-operations\/","og_locale":"ru_RU","og_type":"article","og_title":"What Are Secondary Machining Operations?","og_description":"Secondary machining operations are the finishing, re-fixturing, and follow-","og_url":"https:\/\/www.ypmfg.com\/ru\/2026\/11\/16\/what-are-secondary-machining-operations\/","og_site_name":"YP-MFG| Custom CNC Parts Made Exactly to Spec","article_published_time":"2026-11-16T03:36:18+00:00","og_image":[{"url":"https:\/\/www.ypmfg.com\/wp-content\/themes\/mb\/images_nengli\/wire-edm-video-cover.webp","type":"","width":"","height":""}],"author":"admin","twitter_card":"summary_large_image","twitter_misc":{"\u041d\u0430\u043f\u0438\u0441\u0430\u043d\u043e \u0430\u0432\u0442\u043e\u0440\u043e\u043c":"admin","\u041f\u0440\u0438\u043c\u0435\u0440\u043d\u043e\u0435 \u0432\u0440\u0435\u043c\u044f \u0434\u043b\u044f \u0447\u0442\u0435\u043d\u0438\u044f":"6 \u043c\u0438\u043d\u0443\u0442"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.ypmfg.com\/ru\/2026\/11\/16\/what-are-secondary-machining-operations\/#article","isPartOf":{"@id":"https:\/\/www.ypmfg.com\/ru\/2026\/11\/16\/what-are-secondary-machining-operations\/"},"author":{"name":"admin","@id":"https:\/\/www.ypmfg.com\/ru\/#\/schema\/person\/1ad07d09a6f18573f3b764ab0b4a8484"},"headline":"What Are Secondary Machining Operations?","datePublished":"2026-11-16T03:36:18+00:00","mainEntityOfPage":{"@id":"https:\/\/www.ypmfg.com\/ru\/2026\/11\/16\/what-are-secondary-machining-operations\/"},"wordCount":1184,"commentCount":0,"image":{"@id":"https:\/\/www.ypmfg.com\/ru\/2026\/11\/16\/what-are-secondary-machining-operations\/#primaryimage"},"thumbnailUrl":"https:\/\/www.ypmfg.com\/wp-content\/themes\/mb\/images_nengli\/wire-edm-video-cover.webp","keywords":["CNC Machining","Cost analysis","Tolerance management","Secondary machining operations","Fixturing"],"articleSection":["Blog"],"inLanguage":"ru-RU","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.ypmfg.com\/ru\/2026\/11\/16\/what-are-secondary-machining-operations\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.ypmfg.com\/ru\/2026\/11\/16\/what-are-secondary-machining-operations\/","url":"https:\/\/www.ypmfg.com\/ru\/2026\/11\/16\/what-are-secondary-machining-operations\/","name":"What Are Secondary Machining Operations?","isPartOf":{"@id":"https:\/\/www.ypmfg.com\/ru\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.ypmfg.com\/ru\/2026\/11\/16\/what-are-secondary-machining-operations\/#primaryimage"},"image":{"@id":"https:\/\/www.ypmfg.com\/ru\/2026\/11\/16\/what-are-secondary-machining-operations\/#primaryimage"},"thumbnailUrl":"https:\/\/www.ypmfg.com\/wp-content\/themes\/mb\/images_nengli\/wire-edm-video-cover.webp","datePublished":"2026-11-16T03:36:18+00:00","author":{"@id":"https:\/\/www.ypmfg.com\/ru\/#\/schema\/person\/1ad07d09a6f18573f3b764ab0b4a8484"},"breadcrumb":{"@id":"https:\/\/www.ypmfg.com\/ru\/2026\/11\/16\/what-are-secondary-machining-operations\/#breadcrumb"},"inLanguage":"ru-RU","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.ypmfg.com\/ru\/2026\/11\/16\/what-are-secondary-machining-operations\/"]}]},{"@type":"ImageObject","inLanguage":"ru-RU","@id":"https:\/\/www.ypmfg.com\/ru\/2026\/11\/16\/what-are-secondary-machining-operations\/#primaryimage","url":"https:\/\/www.ypmfg.com\/wp-content\/themes\/mb\/images_nengli\/wire-edm-video-cover.webp","contentUrl":"https:\/\/www.ypmfg.com\/wp-content\/themes\/mb\/images_nengli\/wire-edm-video-cover.webp","width":1920,"height":1080},{"@type":"BreadcrumbList","@id":"https:\/\/www.ypmfg.com\/ru\/2026\/11\/16\/what-are-secondary-machining-operations\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.ypmfg.com\/"},{"@type":"ListItem","position":2,"name":"What Are Secondary Machining Operations?"}]},{"@type":"WebSite","@id":"https:\/\/www.ypmfg.com\/ru\/#website","url":"https:\/\/www.ypmfg.com\/ru\/","name":"YP-MFG | \u0414\u0435\u0442\u0430\u043b\u0438 \u0441 \u0427\u041f\u0423 \u043d\u0430 \u0437\u0430\u043a\u0430\u0437, \u0438\u0437\u0433\u043e\u0442\u043e\u0432\u043b\u0435\u043d\u043d\u044b\u0435 \u0432 \u0442\u043e\u0447\u043d\u043e\u043c \u0441\u043e\u043e\u0442\u0432\u0435\u0442\u0441\u0442\u0432\u0438\u0438 \u0441 \u0442\u0435\u0445\u043d\u0438\u0447\u0435\u0441\u043a\u0438\u043c\u0438 \u0442\u0440\u0435\u0431\u043e\u0432\u0430\u043d\u0438\u044f\u043c\u0438","description":"","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.ypmfg.com\/ru\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"ru-RU"},{"@type":"Person","@id":"https:\/\/www.ypmfg.com\/ru\/#\/schema\/person\/1ad07d09a6f18573f3b764ab0b4a8484","name":"\u0430\u0434\u043c\u0438\u043d\u0438\u0441\u0442\u0440\u0430\u0442\u043e\u0440","image":{"@type":"ImageObject","inLanguage":"ru-RU","@id":"https:\/\/secure.gravatar.com\/avatar\/5edfa2692bdacc5e6ee805c626c50cb44cebb065f092d9a1067d89f74dacd326?s=96&d=mm&r=x","url":"https:\/\/secure.gravatar.com\/avatar\/5edfa2692bdacc5e6ee805c626c50cb44cebb065f092d9a1067d89f74dacd326?s=96&d=mm&r=x","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/5edfa2692bdacc5e6ee805c626c50cb44cebb065f092d9a1067d89f74dacd326?s=96&d=mm&r=x","caption":"admin"},"sameAs":["http:\/\/127.0.0.57"],"url":"https:\/\/www.ypmfg.com\/ru\/author\/admin\/"}]}},"permalink_manager":null,"_links":{"self":[{"href":"https:\/\/www.ypmfg.com\/ru\/wp-json\/wp\/v2\/posts\/1417","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.ypmfg.com\/ru\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.ypmfg.com\/ru\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.ypmfg.com\/ru\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.ypmfg.com\/ru\/wp-json\/wp\/v2\/comments?post=1417"}],"version-history":[{"count":0,"href":"https:\/\/www.ypmfg.com\/ru\/wp-json\/wp\/v2\/posts\/1417\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.ypmfg.com\/ru\/wp-json\/wp\/v2\/media\/1418"}],"wp:attachment":[{"href":"https:\/\/www.ypmfg.com\/ru\/wp-json\/wp\/v2\/media?parent=1417"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.ypmfg.com\/ru\/wp-json\/wp\/v2\/categories?post=1417"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.ypmfg.com\/ru\/wp-json\/wp\/v2\/tags?post=1417"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}