맞춤형 금속 및 플라스틱 부품. 최소 3일 이내 출고.

알루미늄 CNC 가공 부품 검사: 재질, 기준점 및 표면 처리

게시일:

알루미늄 CNC 가공 부품 검사: 재질, 기준점 및 표면 처리

Aluminum CNC parts should be accepted against the drawing revision and agreed inspection plan. Appearance alone cannot confirm alloy, bore fit, hole position or flatness. This guide explains what to inspect, when to inspect it and which records make the result traceable.

Aluminum pocketed part with inspection callouts for datum surface, hole location and finish boundary

1. Confirm alloy, temper and stock traceability

Specify the complete material designation, such as 6061-T6, together with the applicable product specification where required. Alloy, temper and product form affect properties; an alloy name alone is incomplete. Match material certificates to the supplied stock and link the material lot to the finished batch when traceability is required. A dimensional report does not establish material identity.

Do not accept 7075 as an automatic upgrade to 6061. Strength, corrosion behavior, finish appearance and service conditions must be reviewed by the designer. For material selection, see our 알루미늄 밀링 가이드.

2. Establish datums before measuring features

A datum reference frame defines how a part is oriented for measurement. A hole can have the correct diameter and still be in the wrong location. Inspect size and location separately, using the drawing’s datum order and geometric requirements. Do not substitute an edge-to-hole caliper reading for a specified positional tolerance.

특징 Possible inspection approach What to agree
구경 Bore gauge, suitable plug gauge or CMM Size limits, accessibility and measurement condition
Hole pattern CMM or suitable fixture referenced to drawing datums Datum simulation and positional requirement
Mounting face Surface plate method or CMM as appropriate Flatness requirement and support condition
Surface texture Profilometer where required Parameter, direction and applicable standard

The instrument must suit the tolerance and feature. Measurement uncertainty, calibration, temperature and fixturing matter more as tolerances become tighter. A CMM is not automatically the best method for every dimension.

3. Inspect in the required finish condition

Anodizing converts aluminum at the surface and changes the effective dimensions of bores and external features. Total coating thickness is not the same as outward dimensional growth. Agree coating type, thickness range, masking and whether each critical dimension applies before or after finishing.

For a fitted bore, the drawing should state the final acceptance limits and whether masking is permitted. Do not apply a universal coating allowance to every alloy, geometry and anodizing process. Machining after anodizing is possible, but removes the coating in the machined area and must be planned.

4. Turn inspection results into an acceptance record

Use a ballooned drawing or equivalent characteristic list. Record drawing revision, nominal value, limits, actual result, instrument or method and inspected quantity. Specify whether the requirement is first-article inspection, sampled inspection or inspection of every part; these are different scopes.

Material certificates, dimensional reports and first-article documentation can be discussed with YP-MFG through our quality control team. Agree the scope and price before ordering.

Common inspection discrepancies

Finding Possible cause Next check
Flatness changes after unclamping Clamping deformation or residual stress Support and free-state measurement condition
Bore fits before coating but not afterward Finish allowance or masking not defined Final bore limits and coating process
Hole size passes but assembly fails Location, orientation or mating-part issue Datum-based position and assembly stack
Cosmetic mismatch across batches Material, surface preparation or finish variation Agreed appearance sample and finish specification

Inspection FAQ

Should every dimension have the tightest tolerance?

No. Assign tolerances from functional requirements. Blanket tight tolerances increase manufacturing and verification effort without necessarily improving assembly.

Can YP-MFG hold ±0.003 mm?

This may be available on suitable features after engineering review of geometry, material, size and inspection method. It is not a general acceptance tolerance for an entire aluminum part.

도면 검토 요청하기

YP-MFG는 1개부터 맞춤형 가공 주문을 접수합니다. 3D 모델과 치수 도면, 재질 사양, 표면 처리, 수량 및 배송지를 당사를 통해 보내주시기 바랍니다. 견적 요청 페이지. 일반적으로 모든 정보를 접수한 후 24시간 이내에 답변해 드리며, 기술 관련 문의의 경우 정확한 견적을 제시하기 전에 추가 확인이 필요할 수 있습니다.

이 기사 공유하기:
댓글
ko_KRKorean